VJ-LinkWiki

Light desksHog 4

High End Systems Hog 4 consoles and Hog 4 PC.

Hog 4 outputs Art-Net and sACN from the console or a DP8000 processor.

Beta

Not yet tried with this desk. The steps follow the maker's manual; menu names can differ between software versions. Please tell us if it works: report a problem or on Discord.

Connection

HDMI / DPHog 4Art-Net / sACNSwitch / routerVJ-LinkcomputerProjector / LED wall
Network cable from the desk to the VJ-Link computer, the picture goes by HDMI or DisplayPort.

On the desk

  1. Setup → Network, select the DMX processor (DP) of the console.

  2. In its Art-Net or E1.31 (sACN) output settings enable the universe VJ-Link listens to.

  3. Make sure the Art-Net/sACN network port is in the VJ-Link range.

Patch

  1. Patch VJ-Link on the universe and start address you set in VJ-Link under Settings → DMX and network, as 91 channels: either as a fixture type built from the CSV channel list (Settings → DMX and network → Save channel list (CSV)) or as 91 single dimmers.

  2. Put the channels you need on faders or executors: master (1), scene (3), the color slots (9–28) and the layer opacities (29, 39, 49, 59) are a good start.

  3. Move a fader and watch CONNECT → Live values in VJ-Link: the bar of the channel moves, the DMX pill at the top turns green.

VJ-Link can send MIDI timecode to the desk (Settings → Timecode → Send, MIDI output). The desk's timecode show then fires its cues in sync with the videos and the SHOW timeline. Connect a MIDI interface from the VJ-Link computer to the desk's MIDI in.

Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd

Something missing or wrong?

Ask in our Discord or report a problem. Reports from real gear help most, also when something does not work.